Filter
Top Products
1-2
Installing the Management Module
Included Parts
Installing the Management
Module
Included Parts
Verify that these parts were included with the product:
• Switch 208/224 Management Module
• HP AdvanceStack Switch 208/224 Management Module
Installation and Reference Guide (5966-5228), this manual
• Console cable (5182-4794)
• HP AdvanceStack Assistant for Windows CD kit
• HP AdvanceStack Products CD kit
Installation Steps
Caution Anti-Static Precautions:
Static electricity can severely damage the sensitive electronic components on
the module. When installing the module in your switch, follow these proce-
dures to avoid damage from static electricity:
■ Handle the module by its edges and avoid touching the components and
the circuitry on the board.
■ Equalize any static charge difference between your body and the switch
by wearing a wrist static-protector strap and attaching it to the switch's
metal body, or by frequently touching the switch's metal body while you
are installing the module.
1. Before installing the Switch Management Module, unplug your switch
from the power source. This protects the module and switch from poten-
tial electrical damage.
2. Unscrew the two captured screws holding the cover plate to the switch's
Management Slot and remove the cover, as shown in figure 1-2. Note that
the screws will release outward when unscrewed far enough. Do not
unscrew them completely from the cover plate.
YUMAMOD.BK : 1_yminst.fm5 Page 2 Thursday, February 20, 1997 12:54 PM