Filter
Top Products
4-18
Configuring the Switch From the Console
Configurable Features
Configuring the Switch From
the Console
Figure 4-12. Example of the STP Configuration Screen
5. If the remaining STP parameter settings are adequate for your network,
go to step 8.
6. Use [Tab] or the arrow keys to select the next parameter you want to
change, then type in the new value. (If you need information on STP
parameters, press [Enter] to select the Actions line, then press H
to get
help.)
7. Repeat step 6 for each additional parameter you want to change.
8. When you are finished editing parameters, press [Enter] to return to the
Actions line.
9. Press [S] to save the currently displayed STP parameter settings and return
to the Configuration menu. The Spanning Tree configuration is automat-
ically activated when it is saved.
10. Return to the Main Menu to access other functions.
YUMAMOD.BK : 4_ymcnfg.fm5 Page 18 Thursday, February 20, 1997 12:54 PM