Filter
Top Products
4-2
Configuring the Switch From the Console
Overview
Configuring the Switch From
the Console
To get Help on individual parameter descriptions. In all screens except
the Advanced Commands screen there is a Help option in the Actions
menu. Whenever the Actions menu is active, you can display Help for that
screen’s parameters by pressing [H]. (The Actions menu is active whenever
any of the choices in the Actions menu is highlighted.) For example:
Figure 4-1. Example Showing How To Display Help
To get Help on the actions or data fields in each screen: Use the arrow
keys ( [<], [>], [^], or [v]) to select an action or data field. The help line under
the Actions menu describes the currently selected action or data field. (For
guidance in how to navigate in a configuration screen, see the instructions
provided at the bottom of the screen, or refer to “Screen Structure and
Navigation” on page 3-9.)
pressing [H] or highlighting
H
elp and pressing [Enter]
displays Help for the
parameters listed in the
upper part of the screen
highlight on any
item in the
Actions menu
indicates that the
Actions menu is
help line
default values are
shown in brackets [ ]
YUMAMOD.BK : 4_ymcnfg.fm5 Page 2 Thursday, February 20, 1997 12:54 PM