Filter
Top Products
Removal and replacement procedures 33
2.
Lift up the front bezel and remove it from the chassis.
To replace the component, reverse the removal procedure.
Access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
To remove the component:
1.
Power down the server (on page 31).
2.
Extend or remove the server from the rack ("Extend the server from the rack" on page 30, "Remove
the server from the rack" on page 31).
3.
Open the front bezel ("Front bezel" on page 32).
4.
Using a T-10/T-15 Torx screwdriver, unlock the access panel locking latch.
5.
Lift up on the hood latch handle and remove the access panel.
To replace the component, reverse the removal procedure.
Rack bezel
To remove the component:
1.
Extend or remove the server from the rack ("Extend the server from the rack" on page 30, "Remove
the server from the rack" on page 31).
2.
Remove the access panel ("Access panel" on page 33).