Filter
Top Products
Removal and replacement procedures 56
8.
Close the heatsink retaining latches.
9.
Install the processor air baffle.
10.
Install the access panel.
11.
Do one of the following:
o
Install and lock the bezel.
o
Slide the server back into the rack.
12.
Power up the server.
Heatsink
To remove the component:
1.
Power down the server (on page 31).
2.
Do one of the following:
o
Unlock and remove the bezel ("Front bezel" on page 32).
o
Extend the server from the rack (on page 30).
3.
Remove the access panel ("Access panel" on page 33).
4.
Remove the processor air baffle ("Processor air baffle" on page 45).
5.
Open the heatsink retaining latches.