Filter
Top Products
Removal and replacement procedures 36
Rack rails
NOTE: This procedure applies to rack servers only.
To remove the component:
1.
Power down the server (on page 31).
2.
Remove the server from the rack (on page 31).
3.
Pull the rack rail latch.
4.
Slide the rail to the front of the server to release the rail.
5.
Remove the rail.
6.
Repeat the steps to remove the other rail.
To replace the component, reverse the removal procedure.
Power supply blank
CAUTION: Do not attempt to remove and replace a power supply as a hot-plug procedure
unless both bays are populated with power supplies.