Filter
Top Products
Removal and replacement procedures 61
o
Extend the server from the rack (on page 30).
3.
Remove the access panel ("Access panel" on page 33).
4.
Remove all expansion boards ("Expansion board" on page 43).
5.
Remove the processor air baffle ("Processor air baffle" on page 45).
6.
Remove the center wall ("Center wall" on page 46).
7.
Remove the memory board ("Memory board" on page 50).
8.
Disconnect the cable from the internal video connector on the system board.
9.
Extend or remove the media bay spacer from the chassis.
10.
Remove the video connector.
11.
Remove the cable from the clip on the media bay spacer.
To replace the component, reverse the removal procedure.