Filter
Top Products
Removal and replacement procedures 43
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all PCI slots have either an expansion slot cover or an expansion board installed.
To replace the component, reverse the removal procedure.
Expansion board
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the expansion boards.
To remove the component:
1.
Power down the server (on page 31).
2.
Extend the server from the rack, if applicable ("Extend the server from the rack" on page 30).
3.
Remove the access panel ("Access panel" on page 33).
4.
Disconnect any cables attached to the expansion board.
5.
Release the retainer clip.
6.
Press the slot release lever and swing the slot release lever upward.