Filter
Top Products
Removal and replacement procedures 35
3.
Remove the feet.
To replace the component, slide it back into the locking slot. Be sure that the foot clicks securely into the
chassis. Repeat with the remaining feet, as necessary.
Tower configuration panels
To remove the component:
1.
Power down the server (on page 31).
2.
Remove the tower feet ("Feet" on page 34).
3.
Remove the tower configuration panels:
a.
Use the T-10/T-15 Torx screwdriver to remove the two front panel screws.
b.
Remove the tower configuration panels.
To replace the component, reverse the removal procedure.