Filter
Top Products
Cabling 70
Cabling
Cabling overview
This section provides guidelines that help you make informed decisions about cabling the server and
hardware options to optimize performance.
For information on cabling peripheral components, refer to the white paper on high-density deployment at
the HP website (http://www.hp.com/products/servers/platforms
).
CAUTION: When routing cables, always be sure that the cables are not in a position where
they can be pinched or crimped.
Diskette drive cabling
SAS cabling
NOTE: The center wall is removed for illustration purposes only.
•
SAS data cabling
IMPORTANT: When installing a x3/x1 SAS cable, HP recommends that the x3 part of the
x3/x1 cable be linked to the SAS hard drive backplane connector that corresponds to hard
drive slots 1 to 4. In this setup, hard drive slot 1 will not be available, but since hard drive slots
2 to 4 will be connected, one continuous volume can be created.