Filter
Top Products
Removal and replacement procedures 50
WARNING: Always comply with all electrostatic and thermal guidelines to prevent bodily
injury and ensure a properly functioning system when performing hot-plug operations.
WARNING: To prevent personal injury from hazardous energy:
• Remove watches, rings, or other metal objects.
• Use tools with insulated handles.
• Do not place tools or metal parts on top of batteries.
Memory board
To remove the component:
1.
Power down the server (on page 31).
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("Front bezel" on page 32).
o
Extend the server from the rack (on page 30).
3.
Remove the access panel ("Access panel" on page 33).
4.
Remove the processor air baffle ("Processor air baffle" on page 45).
5.
Remove the memory board and place it on a flat surface.
To replace the component, reverse the removal procedure.
FBDIMM
To remove the component:
1.
Power down the server (on page 31).
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("Front bezel" on page 32).
o
Extend the server from the rack (on page 30).