Filter
Top Products
Removal and replacement procedures 67
5.
Close the processor retaining latch and the processor socket retaining bracket.
6.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
Allow the alcohol to evaporate before continuing.
7.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
8.
Install the heatsink ("Heatsink" on page 56).
IMPORTANT: To ensure proper cooling, be sure the processor air baffle is installed at all times
(if applicable).
9.
Install all other components removed.
10.
Power up the server.