Filter
Top Products
2 - 2
If you ordered additional accessories for the Thor VM1, verify they are also included with the order. Keep the original packaging
material in the event the Thor VM1 should need to be returned for service. For details, see Product Service and Repair (page 9-
1).
Initial Setup for Thor VM1
This page lists a quick outline of the steps you might take when setting up a new Thor VM1. More instruction for each step is
listed later in this guide.
Contact Technical Assistance (page 9-1) if you need additional help.
Hardware Setup
1. Install RAM Mount (page 4-18) or Install U Bracket Mount (page 4-24) to the vehicle.
2. Place Thor VM1 in the Dock (page 4-16).
3. Connect Cables (page 4-27) for any peripherals.
4. Connect Power (page 4-28).
5. Secure all cables in Strain Relief Cable Clamps (page 4-27).
6. Press the Power Switch (page 3-5) on the dock to the on position.
7. Press the Power Button (page 3-5) on the Thor VM1.
Software
Languages
The Thor VM1 may be shipped with an English only operating system. Contact Technical Assistance (page 9-1) to
order a Thor VM1 Recovery DVD (page 5-27) in a different language. The language installed is identified on the Soft-
ware tab of the About (see page 5-3) control panel.
First Boot
When a new Thor VM1 starts up a EULA (End User License Agreement) may be displayed on the touch screen. It
remains on the screen until the Accept or Decline button is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the Thor VM1 continues the startup process. The EULA is not
presented to the user again.
Tap the Decline button to decline the EULA and the Thor VM1 reboots. It will continue to reboot until the Accept but-
ton is tapped with the stylus.
Software Setup
Hardware setup should be completed before starting software setup.
1. If prompted, perform Touch Screen Calibration (page 5-26).
2. Select a Power Scheme (page 5-18) and set timers.
3. Adjust Speaker Volume (page 2-5).
4. Pair Bluetooth (page 5-6) devices
5. Set Wireless client parameters using the Summit Client Utility (page 6-1).
6. Set terminal emulation parameters.
Quick Mount Smart Dock
The Thor VM1 assembly consists of two parts, the Thor VM1 computer and the Quick Mount Smart Dock.
The Thor VM1 contains an internal UPS battery that, once fully charged, powers the Thor VM1 for a minimum of 30 minutes
when the unit is not mounted in the dock.
The dock provides: