Filter
Top Products
5 - 6
Bluetooth
Start > Control Panel > Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
Factory Default Settings
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, con-
nected and disconnected. There may be audible or visual signals as paired devices re-connect with the Thor VM1.
• The default Bluetooth setting is On.
• The Thor VM1 cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled
(unchecked) on the Settings panel.
• Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.
• When Filtered Mode is enabled, the Thor VM1 can pair with one Bluetooth scanner and one Bluetooth printer.
• When Filtered Mode is disabled, the Thor VM1 can pair with up to four Bluetooth devices.
• It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the Thor
VM1.
• The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the Thor VM1 during
the pairing process.
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the Thor VM1. The Thor
VM1 operating system has been upgraded to the revision level required for Bluetooth client operation. An application (or
API) is available that will accept data from serial Bluetooth devices.
Discovered Devices None
Settings
Turn off Bluetooth Disabled
Computer is connectable Enabled
Computer is discoverable Disabled
Prompt if devices request to
pair
Enabled
Continuous search Disabled
Filtered Mode Enabled
Printed Port - COM7: Disabled (unchecked) by default in both Filtered
and Non Filtered Modes. The option is dimmed in
Non Filtered Mode.
Logging Disabled
Computer friendly name System Computer Description
Reconnect
Report when connection
lost
Enabled
Report when reconnected Disabled
Report failure to connect Enabled
Clear Pairing Table on Boot Disabled
Auto Reconnect on Boot Enabled
Auto Reconnect Enabled