Filter
Top Products
4 - 58
Replace Front Panel
Front Panel Options
The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touch screen and
optional defroster. Should any of these components fail, the front panel assembly can easily be replaced to reduce down-
time. The replacement front panel is available in several configurations:
• 64-key ANSI keyboard with standard touch screen or cold storage touch screen
• 64-key 3270 keyboard with standard touch screen or cold storage touch screen
• 64-key 5250 keyboard with standard touch screen or cold storage touch screen
Equipment Required
The following equipment is user-supplied:
• Torquing tool capable of measuring inch pounds
• #2 Phillips screwdriver bit
Replacement Procedure
7. Carefully lift the front panel away from the device.
CAUTION - Before replacing the Thor VM1 front panel, Disconnect UPS Battery (page 4-55).
1. Place the Thor VM1 on a clean, well-lit surface before perform-
ing the front panel replacement.
2. Shutdown the Thor VM1.
3. Remove the Thor VM1 from the Quick Mount Smart Dock.
4. Disconnect UPS Battery (page 4-55).
5. Loosen the fourteen (14) captive M3 screws holding the front
panel. Use a #2 Phillips bit.
6. Carefully lift the front panel away from the device
!
10
1
2
3
4
5
67
8
9
11 1213
14
Slot on
Thor VM1
Wiring Connector
on Thor VM1
Slot on
Front Panel
Wiring Connector
on Front Panel