Filter
Top Products
5 - 11
Reconnect
Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.
Options
Option Function
Report when connection
lost
This option is Enabled (checked) by default.
There may be an audio or visual signal when a connection between a paired, active
device is lost.
A visual signal may be a dialog box placed on the display notifying the user the con-
nection between one (or all) of the paired Bluetooth devices has stopped. Tap the ok
button to remove the dialog box from the screen.
Report when reconnected This option is Disabled (unchecked) by default.
There may be an audio or visual signal when a connection between a paired, active
device is made.
A visual signal may be a dialog box placed on the display notifying the user the con-
nection between one (or all) of the paired Bluetooth devices has resumed. Tap the
ok button to remove the dialog box from the screen.
Report failure to recon-
nect
This option is Enabled (checked) by default.
The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired, active
device fails to re-connect. A visual signal may be a dialog box placed on the display
notifying the user the connection between one (or all) of the previously paired Blue-
tooth devices has failed.
Tap the X button or ok button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting; at-
tempted to pair with a device that is currently paired with another device; attempted
to pair with a known device that moved out of range or was turned off; attempted to
pair with a known device but the reason why reconnect failed is unknown.
Clear Pairing Table on
Boot
This option is Disabled (unchecked) by default.
When enabled (checked), all previous paired information is deleted upon any reboot
sequence and no devices are reconnected.
When enabled (checked) “Auto Reconnect on Boot” is automatically disabled
(dimmed).
Auto Reconnect on Boot This option is Enabled (checked) by default. All previously paired devices are recon-
nected upon any reboot sequence.
When disabled (unchecked), no devices are reconnected upon any reboot sequence.