Filter
Top Products
4 - 17
Dock I/O Pin Cover.
Padlock
Laptop Security Cable
The dock contains a tethered I/O Pin Cover to protect the I/O pins on the dock when
a Thor VM1 is not mounted in the dock.
• When the Thor VM1 is not installed in the dock, use the I/O Pin Cover to protect
the pins on the dock as shown.
• When a Thor VM1 is installed in the dock, the I/O Pin Cover can be placed out of
the way behind the dock.
It may be desirable to secure the Thor VM1 in the dock so it cannot be
removed from the dock. The quick release handle on the Thor VM1 is
notched to allow a user supplied standard padlock to be placed through a
hole in the bracket on the back of the Thor VM1 in the location shown
below. Once the padlock is installed, the release handle cannot be moved
so the Thor VM1 cannot be removed from the dock. The padlock shackle
must be smaller than 3/16” (4.76mm).
A cable tie wrap can be used instead of a padlock if desired.
The Thor VM1 can be secured with a standard laptop security cable
using the slot on the back of the Thor VM1.