Filter
Top Products
SIM card installation
Read through these installation instructions before commencing assembly.
Connect the supply cable only when everything else has been assembled.
This document describes the process of inserting a SIM card into the PCCard of your Thor VX9 computer.
Requirements
In order to perform this operation you need the following:
l Torx 20 screwdriver.
l SIM card from your network operator.
Installation
The following procedure describes how to insert a SIM card:
1. Place the Thor VX9 upside down onto a flat clean surface.
2. Remove the service hatch by loosening the 2 torx screws.
3. Remove the antenna pigtail from the GPRS/EDGE/3G PCCard.
4. Remove the GPRS/EDGE/3G PCCard by pressing the PCCard eject button.
4-97