Filter
Top Products
PCMCIA Slots
The Thor VX9 has two optional PCMCIA slots. The PCMCIA slots are stacked on top of each other and can be accessed by
removing the service lid.
1. Torx 20 Screws
2. PCMCIA Card Slots
3. PCMCIA Card Ejection
Buttons
PCMCIA Card Management is handled by Microsoft Windows. The PCMCIA cards are Plug and Play devices and can be “hot
swapped”. For more details, refer to Help and Support on the Windows Start menu or refer to the documentation delivered with
the PCMCIA card.
Install PCMCIA Cards
Equipment Needed: Torx 20 screwdriver
1. Turn the Thor VX9 off and detach the power cable.
2. Loosen the two (2) Torx 20 screws securing the service hatch so the cover can be removed. The screws are a captive
part of the cover and cannot be removed.
3. Partially insert the 2.4GHz Type II PCMCIA Radio into Slot 0 (the upper right slot).
4. Insert the PCMCIA card into the slot.
5. Reattach the service panel and tighten the screws. Exercise care to make sure the antenna cables are not pinched.
6. Re-connect the power cord/cable and turn the Thor VX9 on.
2-33