Filter
Top Products
Installing a large server
Use the following general procedure to install a PDU horizontally in a rack cabinet:
Server handles
Server rail screws
Cable-management arm
Rear of rail
Front of rail
1. See the server documentation for detailed installation information.
2. Use the template and rack mounting instructions that come with your server to
determine where to install cage nuts.
3. Install the slide rails and cable-management arm that come with your server,
using the provided screws and cage nuts.
Note: If required, adjust the length of the rails to fit the depth of your rack
cabinet.
4. Install the server handles; then, lift the server and place it on the extended rails.
5. Attach the server to the slide rails with the provided screws; then, remove the
server handles and slide the server into the rack cabinet.
6. See your server documentation for information on how to connect cables.
Installing a small server
Use the following general procedure to install a small server in your rack cabinet:
112 Hardware Maintenance Manual: IBM PC Server/Enterprise Racks Types 9306, 9308