Filter
Top Products
Note: The Flat Panel Monitor Rack Mount Kit and keyboard tray require 3U of rack
mounting space. If the keyboard tray does not have at least 2U of clearance
above it, relocate the keyboard tray within the rack.
Use the following steps to install the Flat Panel Monitor Rack Mount Kit:
1. Remove the cable cover 1 from the new monitor stand; then, remove the
four screws (two per hinge) that secure the hinges 2 to the stand.
2. Install the hinges on the flat panel monitor, using the six screws that you
removed from the old monitor stand.
Note: Be sure to slide each hinge into place on the back of the monitor and
align the holes in the hinges with holes on the monitor.
3. Lower the flat panel monitor onto the new monitor stand, making sure that you
align the holes in the stand with holes in the hinges; then, secure the flat panel
monitor to the monitor stand with the four screws that you removed earlier.
Figure 81. Removing the hinges from the new monitor stand
Figure 82. Installing the hinges on the flat panel monitor
Installing Optional Devices 177