IBM 9306 Personal Computer User Manual


 
NetBAY3E enclosure
Features
The IBM NetBAY3E enclosure provides a convenient 3-U high by 28-inch deep
storage cabinet for the installation of computer devices.
Note: Vertical measurements are given in rack units (U). One U is equal to 4.45
cm (1.75-inches).
Up to three NetBAY3E enclosures can be stacked under certain IBM servers.
Devices such as the IBM EXP10, an uninterruptable power supply (UPS), or various
telecommunications equipment can also be installed in a NetBAY3E enclosure.
Important:
v The maximum server weight is 77 kg (170 lb.).
v Refer to the latest IBM Server Hardware Maintenance Manual when
servicing the server.
v Assure all power and signal cables are routed properly and are not
pinched.
v Make sure NetBAY3E enclosures in a stack are securely fastened
together.
v Make sure empty NetBAY3E enclosures (no devices installed) have
the rear cover securely attached.
v Servers are lifted onto and off of the NetBAY3E enclosure. Make
sure you have help when lifting.
Locations
The following sections contain information on specific equipment locations.
Casters
v Two fixed casters 1at the front of the NetBAY3E enclosure.
v Two swivel casters2 at the rear of the NetBAY3E enclosure.
© Copyright IBM Corp. 2001 79