Filter
Top Products
Table 19 (Page 2 of 2). PRMT MACRO to JES2 Parameter Mapping
PRMT
Parameter
Description JES2 RMT
Parameter
Comment
MSGSPCE Suppress four space-3
commands after messages
N/A
PUN Width of card punch records N/A (always 80)
PUNROUT default punch routing ROUTECDE Same for print and punch in
JES2
REF Short form for replication N/A Use ranges: RMT(m-n) •
SCE Space
Compression/Expansion
(2770, 3780)
COMPRESS
TRNSP Punch transparency TRANSPAR
TURNEOJ Line turnaround required (Based on
device
TYPE)
Note: • JES2 does not support the ″Short Form″ of RJE definitions, but ranges may be used to
define the same characteristics on many remotes:
RMT(20-27) WAITIME=1,MFORM=J
10.4.1.4 Define SNA Remote Workstations
This table shows the conversion of POWER PRMT parameters to JES2 RMT
remotes.
Table 20. PRMT MACRO to JES2 Parameter Mapping
PRMT
Parameter
Description JES2 RMT
Parameter
Comment
REMOTE= remote ID number RMT(nnn) ′nnn′ is the remote ID
number
LUT1 for
SNA
TYPE=LUTYPE1 for SNA
CMPACT Compaction table name COMPACT=
YES|NO
Compaction table number
specified on individual
remote printer or punch
CONSOLE Separate console device for
messages
CONS
LSTROUT Default routing for LST
output
Route Applies to both PRT and
PUN routing
LU Logical Unit (LU) name LUNAME
MAXLRECL Maximum logical record
length
N/A (not necessary)
PSWRD Logon remote workstation
password
Password (use RACF)
PUNROUT Default routing for PUN
output
Route Applies to both PRT and
PUN routing
REF Short form for replication N/A Use ranges: RMT(m-n) •
SESSLIM Maximum number of
sessions (devices)
N/A Based on number of devices
specified in JES2.
XLATE Translate Printed output from
X′00′ - X′3F′ to X′40′
N/A Specify TRANS on the
R(nn).PR(m) statement.
Note: • See note in previous table.
Chapter 10. POWER and JES2 229