Filter
Top Products
General Attributes Always Required
The following general attributes are the default settings for the diagnostics. Be sure
your terminal is set to these attributes.
Note: These attributes should be set before the diagnostics are loaded.
Refer to the following table.
General Setup
Attributes
3151
/11/31/41
Settings
3151
/51/61
Settings
3161/3164
Settings
Description
Machine mode 3151 3151 PC 3161
or
3164
The diagnostics are set to
emulate use of the 3161 ASCII
Display Terminal. If your ter-
minal can emulate a 5085, 3161
or 3164 terminal, use the fol-
lowing attribute settings. Other-
wise, refer to your operator's
manual, compare the following
attribute descriptions with those
of your terminal, and set your
attributes accordingly.
Generated
Code Set
ASCII
Screen Normal Normal Uses the EIA-232 interface pro-
tocol.
Row
and
filemn
24 x 80 24 x 80 Uses the EIA-232 interface pro-
tocol.
Scroll Jump Jump Jump When the last character on the
bottom line is entered, the screen
moves down one line.
Auto LF Off Off Off For the "On" setting, pressing the
Return key moves the cursor to
the first character position of the
next line. For the "Off" setting,
pressing the Return key moves
the cursor to the first character
position of the current line. The
CR and LF characters are gener-
ated by the New line setting.
CRT saver Off Off 10 The "10" setting causes the
display screen to go blank if
there is no activity for 10
minutes. When the system unit
sends data or a key is pressed,
the display screen contents are
displayed again.
6-4 RS/6000 Enterprise Server Model H Series User's Guide