IBM RS/6000 Server User Manual


 
Update
This selection allows you to update the service processor and system firmware in
your system unit from an image on a 3.5-inch diskette. After choosing to update the
firmware and confirming this choice, you must insert the diskette containing the
firmware image.
In order to create a firmware diskette with the latest level of firmware available, see:
http://www.rs6.ibm.com/support/micro
When prompted, insert the firmware update diskette containing the new firmware
image.
ATTENTION: While the new firmware image is being copied into your system unit,
you must not turn off the system unit. Turning off the system unit during the
update process may render your system unit inoperable.
After the flash update is complete, the system unit restarts. If the flash update does
not complete successfully or the system unit does not restart after the flash update,
contact your authorized reseller or marketing representative.
4-22 RS/6000 Enterprise Server Model H Series User's Guide