IBM RS/6000 Server User Manual


 
Using the CD-ROM Drive
CAUTION:
A Class 3 laser is contained in the device. Do not attempt to operate the device
while it is disassembled. Do not attempt to open the covers of the device, as it
is not serviceable and is to be replaced as a unit.
The CD-ROM is located in bay A2 of the system unit, see page 2-17 for location.
Your CD-ROM drive looks like the one shown in the illustration, and the controls are
located as indicated.
Tray Opening
Emergency
Eject Access
Load/Unload
Button
Status LightVolume Control
Head Phone
Jack
When the CD-ROM is set to On, the status light indicates one of several conditions.
The following are status light states and the respective conditions of the CD-ROM
drive:
Off during standby with the tray loaded or unloaded
Blinks from insertion of the tray to completion of initialization
Blinks slowly when disc is dusty
Blinks fast when in the audio mode
Lights during data transfer operations
Lights steady when:
No disc is in the tray
The disc is in the tray upside down
Some condition exists that should be checked. If this occurs, contact your
service representative.
Chapter 2. Using the System Unit 2-13