Filter
Top Products
2. Select the pdisk that you want to certify. The following instructions are dis-
played:
┌──────────────────────────────────────────────────────────────────────────────────┐
│ SSA SERVICE AIDS 8238 │
┌──────────────────────────────────────────────────────────────────────────────────┐
│ CERTIFY DISK 8244 │
┌──────────────────────────────────────────────────────────────────────────────────┐
│ CERTIFY DISK 8245 │
│ │
│ pdisk1 22222222 -4-P 9.1 GB SSA F Physical Disk Drive │
│ │
│ Move cursor onto selection, then press Enter. │
│ │
│ Set or Reset Identify. │
│ Select this option to set or reset the Identify indicator │
│ on the disk drive. │
│ Certify. │
│ Select this option to start the Certify operation. │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ F3=Cancel F1=Exit │
│ │
└──────────────────────────────────────────────────────────────────────────────────┘
3. If you are not sure of the identification (pdisk number) of the disk drive module
that you want to format, use the identify function to get a positive physical iden-
tification of the module (see “The Identify Function” on page 7-31). You can
further ensure that you have selected the correct disk drive module by verifying
that the serial number on the front of the disk drive module is the same as the
serial number that is displayed on the screen.
4. When you are sure that you have selected the correct disk drive module, select
Certify.
7-46 RS/6000 Enterprise Server Model H Series User's Guide