IBM RS/6000 Server User Manual


 
2. Select the hdisk or pdisk that you want to test.
3. If you select an hdisk, a list of pdisks is displayed:
┌──────────────────────────────────────────────────────────────────────────────────┐
│ SSA SERVICE AIDS 8238 │
┌──────────────────────────────────────────────────────────────────────────────────┐
│ CONFIGURATION VERIFICATION 8239 │
┌──────────────────────────────────────────────────────────────────────────────────┐
│ CONFIGURATION VERIFICATION 82391 │
hdisk3 22222222 -3-L SSA Logical Disk Drive
│ To set or reset Identify, move cursor onto selection, then press enter.
Physical Serial# Adapter Port SSA_Addr Status
{TOP}
pdisk 22222222 -2 A1 5 Good
-2 A2 5 Good
-3 A1 1 Good
-3 A2 Good
{BOTTOM}
│ F3=Cancel F1=Exit
└──────────────────────────────────────────────────────────────────────────────────┘
If you select a pdisk, a list of hdisks is displayed:
┌──────────────────────────────────────────────────────────────────────────────────┐
│ SSA SERVICE AIDS 8238 │
┌──────────────────────────────────────────────────────────────────────────────────┐
│ CONFIGURATION VERIFICATION 8239 │
┌──────────────────────────────────────────────────────────────────────────────────┐
│ CONFIGURATION VERIFICATION 82392 │
pdisk 22222222 -3-P 9.1 GB SSA F Physical Disk Drive
│ Move cursor onto selection, then press Enter.
hdisk3 22222222 -3-L SSA Logical Disk Drive
{BOTTOM}
│ F3=Cancel F1=Exit
└──────────────────────────────────────────────────────────────────────────────────┘
Note: If you select the hdisk from this screen, the hdisk configuration is dis-
played.
7-42 RS/6000 Enterprise Server Model H Series User's Guide