Filter
Top Products
historical comparison can be useful to System Administrators and service
personnel.
Read Progress Indicators from Last System Boot
Displays the boot progress indicators (check points), up to a maximum of 100,
from the system boot prior to the one in progress now. This historical
information may be useful to help diagnose system faults.
The progress indicators are displayed in two sections. Above the dashed line
are the progress indicators from the boot that produced the current sessions.
Below the dashed line are progress indicators from the boot preceding the one
that produced the current sessions.
The progress indication codes are chronological from bottom to top. The dashed
line merely represents the point where the latest boot started.
Read Service Processor Error Logs
Displays error conditions detected by the Service Processor.
The time stamp in this error log is Coordinated Universal Time (CUT), a.k.a.
Greenwich Mean Time (GMT). AIX error logs have more information available
and are able to time stamp with local time. See 4-35 for an example of the error
log.
Read System POST Errors
Selecting this item lets you review the results of the POST (Power-On Self Test).
Your server may be able to start in the presence of POST errors if there is
sufficient working system resources. If POST errors occur during start-up, this
error log when used with the diagnostics helps to isolate faults. See 4-36 for an
example of the POST error screen.
Read NVRAM
Displays Non-Volatile Random Access Memory (NVRAM) content.
View System Environmental Conditions
The Service Processor reads all environmental sensors and reports the results to
the user. This option is most useful when surveillance fails, as it allows the user
to determine the environmental conditions that may be related to the failure.
The following is an example of system environment conditions:
4-14
IBM RS/6000 7025 F50 Series User's Guide