Filter
Top Products
Memory-Modules
You can increase the amount of memory in your system by installing
memory-modules
on to an existing memory adapter card or if your system has only
one adapter card installed that is fully populated, you can add an additional memory
adapter card. Your system uses 200-pin, dual inline Error Correcting Code (ECC)
memory modules (DIMMs) to increase system memory.
You install memory-modules into connectors on the memory card located inside the
system. The memory card holds up to 8 pairs of memory-modules and your system
can have 2 memory cards installed. You can install up to 3GB of addressable ECC
memory. The memory-modules sizes available for your system are 32MB, and
128MB.
Attention: Memory modules must be installed in identical pairs.
Attention: Memory modules are sensitive to static electricity discharge. These
devices are wrapped in antistatic bags,to prevent this damage. See page 5-3 for
information on handling Static-Sensitive Devices.
If you are adding additional memory or replacing memory to an existing memory
adapter card, see “Adding or Replacing Memory to an Existing Card” on
page 5-25.
If you are adding memory to a new memory adapter card, see step 2 on
page 5-25.
5-24
IBM RS/6000 7025 F50 Series User's Guide