Filter
Top Products
The following are descriptions of the service aids:
AIX Shell Prompt Service Aid
This service aid allows access to the AIX command line. In order to use this service
aid the user must know the root password (when a root password has been
established).
Backup/Restore Media Service Aid
This service aid allows verification of backup media and devices. It presents a menu
of tape and diskette devices available for testing and prompts for selection of the
desired device. It then presents a menu of available backup formats and prompts for
selection of the desired format. The supported formats are tar, backup, and cpio.
After the device and format are selected, the service aid backups a known file to the
selected device, restores that file to /tmp, and compares the original file to the
restored file. The restored file is also left in /tmp to allow for visual comparison. All
errors are reported.
Configure Remote Maintenance Policy Service Aid
The Remote Maintenance Policy includes modem configurations and phone numbers
to use for remote maintenance support.
Use this service aid to display and change the following settings for the Remote
Maintenance Policy.
Configuration File for Modem on S1
Configuration File for Modem on S2
Enter the name of a modem configuration file to load on either serial port 1 (S1)
or serial port 2 (S2). The modem configuration files are located in the directory
/usr/share/modems. If a modem file is already loaded, it is indicated by 'Modem
file currently loaded'.
Modem file currently loaded on S1
Modem file currently loaded on S2
This is the name of the file that is currently loaded on serial port 1 or
serial port 2.
Note: These settings are only shown when a modem file is loaded for a
serial port.
Call In Authorized on S1 (on/off)
Call In Authorized on S2 (on/off)
7-4
IBM RS/6000 7025 F50 Series User's Guide