Filter
Top Products
General Attributes Always Required
The following general attributes are the default settings for the diagnostics. Be sure
your terminal is set to these attributes.
Note: These attributes should be set before the diagnostics are loaded.
Refer to the following table.
General Setup
Attributes
3151
/11/31/41
Settings
3151
/51/61
Settings
3161/3164
Settings
Description
Machine mode 3151 3151 PC 3161
or
3164
The diagnostics are set to
emulate use of the 3161 ASCII
Display Terminal. If your terminal
can emulate a 5085, 3161 or
3164 terminal, use the following
attribute settings. Otherwise,
refer to your operator's manual,
compare the following attribute
descriptions with those of your
terminal, and set your attributes
accordingly.
Generated
Code Set
ASCII
Screen Normal Normal Uses the EIA-232 interface
protocol.
Row
and
filemn
24 x 80 24 x 80 Uses the EIA-232 interface
protocol.
Scroll Jump Jump Jump When the last character on the
bottom line is entered, the screen
moves down one line.
Auto LF Off Off Off For the "On" setting, pressing the
Return key moves the cursor to
the first character position of the
next line. For the "Off" setting,
pressing the Return key moves
the cursor to the first character
position of the current line. The
CR and LF characters are
generated by the New line
setting.
6-4 IBM RS/6000 7025 F50 Series User's Guide