Filter
Top Products
90 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
Installing the
Clean Access
Agent
Highlights the steps for
installing the Clean Access
Agent
7.2.1, “Installing CCA
Agent” on page 304
Configuring a
CCA OOB VG
server
Highlights all the steps to
configure the CAM and
CAS for a Out-Of-Band
Virtual Gateway server
deployment
7.2.2, “Configuring a
CCA OOB VG server”
on page 306
Configuring Cisco
3750 switch for
NAC Appliance
Switch configuration and
verification for Clean
Access OOB VG
deployment
“Configuring Cisco 3750
switch for NAC
Appliance” on page 352
Part III - Remediation server
Install base Tivoli
Configuration Manager.
This solution assumes
usage of already existing
Tivoli Configuration
Manager server. Detailed
steps required were not
described in this book. For
the installation and
configuration instructions
refer to the product
documentation.
IBM Tivoli Configuration
Manager Version 4.2.3
Planning and
Installation Guide,
GC23-4702-03
Install Tivoli Configuration
Manager Web Gateway.
This describes the
installation of the
prerequisites and Tivoli
Configuration Manager
Web Gateway component
on top of the base Tivoli
Configuration Manager
installation.
8.2.2, “Tivoli
Configuration Manager”
on page 359, and IBM
Tivoli Configuration
Manager Version 4.2.3
Planning and
Installation Guide,
GC23-4702-03
Install and configure
remediation package
Web server.
This section describes the
setup of the WebSphere
application named
SoftwarePackageServer,
which is the interface
between remediation
handler on the client and
Tivoli Configuration
Manager Web Gateway
server.
8.2.4, “Installation of the
Software Package
Utilities” on page 394
Action Notes Reference