Filter
Top Products
198 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
8. Click Finish to close the installation, as shown in Figure 6-68.
Figure 6-68 Successful completion of Cisco Trust Agent installation
9. If you have not created a Certs directory before the installation as described
in “Prerequisites” on page 190 or you were not presented with the window
shown in Figure 6-67 on page 197 during the installation, install the
certificates manually using the ctaCert.exe utility. This utility is located in the
CiscoTrustAgent subdirectory of the installation directory you selected in step
5 on page 195. The syntax for the command is shown below:
ctaCert.exe /add "<path to the certificate file>" /store "Root"
For more information about the utility refer to the Administrator Guide for Cisco
Trust Agent 2.0, which is available at (requires CCO login):
http://www.cisco.com/en/US/partner/products/ps5923/products_maintenance_guide_
book09186a008059a40e.html