Filter
Top Products
110 Intel NetStructure Cache Appliance Administrator’s Guide
Rebooting your system
Rebooting the Intel NetStructure Cache Appliance causes the underlying
operating system to reboot. Rebooting the appliance is not the same as starting
and stopping the caching software on your system. For instructions on how to
start and stop the caching software by using the command-line interface (CLI),
refer to Starting the appliance‚ on page 55 and Stopping the appliance‚ on
page 55. For information on how to start or stop the caching software by using
the Manager UI, refer to Using the Server Basics page‚ on page 24.
You can reboot the appliance in a controlled manner through the CLI. If you find
the appliance in a state where you can’t reboot it in a controlled manner, you can
reboot it by pressing the Reset button located on the front panel. You should use
this reboot method as a last resort. (For exact location of the Reset button, refer to
the Intel NetStructure Cache Appliance Quick Start Guide.)
Note During a reboot operation, the system maintains the state of the caching software.
For example, if the caching software is running when the reboot operation is
initiated, they will still be running after the reboot. On the other hand, if the
caching software is not running at the time of the reboot, it will remain off after
the reboot. However, during the system reboot, caching operations cease
regardless of whether or not the caching software is running at the time of the
reboot.
Rebooting your system from the CLI
You can reboot the appliance from the command-line interface.
▼ Rebooting the appliance from the CLI
1 Select the expert menu, and press Enter.
2 Select reboot, and press Enter.
3 Wait approximately four to five minutes for the appliance’s operating system
to properly shut down and then restart.
Rebooting your system from the front panel
You can reboot the appliance from the front panel.
▼ Rebooting the appliance from the front panel
1 Press the system’s Reset button. (For exact location of the Reset button, refer
to the Intel NetStructure Cache Appliance Quick Start Guide.)
2 Wait approximately two to three minutes for the appliance’s operating system
to shut down and then restart.