Filter
Top Products
60 Intel NetStructure Cache Appliance Administrator’s Guide
5
Press CTRL-X to clear the statistics and return to the previous screen.
Choosing to clear the statistics causes a confirmation message to appear.
6 Select start, and press Enter. Doing so resumes the caching functions in the
appliance.
Rebooting the System
You can reboot the system. Rebooting the system is different than starting or
stopping the caching software. A system reboot performs an orderly shutdown of
the appliance and restarts the operating system.
▼ Rebooting the system
1 Select the main menu, and press Enter.
2 Select reboot, and press Enter. Doing so causes the system to reboot. The
caching software retains its status (on or off) after the reboot operation.
Halting the System
You can halt the system. Halting the system is different than starting or stopping
the caching software or rebooting the system. Halting the system gives little or no
warning to users connected to the machine before logging them off. You should
halt the appliance only as a last resort to problems.
▼ Halting the system
1 Select the main menu, and press Enter.
2 Select halt, and press Enter. Doing so causes a message to display that
indicates the appliance is halting. Shortly after this message the CLI halts.
Changing the administrator password for telnet or
serial access
Connecting to the appliance through telnet or a serial port requires you to enter
an administrator ID and password. When you install the appliance, the default ID
is admin and the password is admin. This procedure allows you to change the
password. The username remains the same.
Note Should you forget your password, contact Customer Service at Intel Corporation
for assistance. For information on how to contact Intel Customer Service, see the
Intel
NetStructure Cache Appliance Product Support booklet that came with your
system.
Important For security, it is highly recommended that you change the password.
▼ Changing the password
1 Select the main menu, and press Enter.