Filter
Top Products
Chapter 5 Using the Command-Line Interface 87
▼ Viewing ICP rules
1 Select the config menu, and press Enter.
2 Select routing, and press Enter.
3 Select icp, and press Enter.
4 Select rules, and press Enter.
5 Select view rules, and press Enter. Doing so causes the file containing the
ICP rules to appear.
Viewing current ICP settings
You can find out if the ICP protocol is enabled or disabled, what the ICP port
number is, whether ICP multicast is enabled or disabled, and the ICP query
timeout by viewing the settings.
▼ Viewing ICP settings
1 Select the config menu, and press Enter.
2 Select routing, and press Enter.
3 Select icp, and press Enter.
4 Select view, and press Enter.
Enabling and disabling ICP
You can enable or disable ICP.
▼ Enabling ICP
1 Select the config menu, and press Enter.
2 Select routing, and press Enter.
3 Select icp, and press Enter.
4 Select enable-icp, and press Enter.
▼ Disabling ICP
1 Select the config menu, and press Enter.
2 Select routing, and press Enter.
3 Select icp, and press Enter.
4 Select disable-icp, and press Enter.