Filter
Top Products
Chapter 5 Using the Command-Line Interface 83
3
Select server, and press Enter.
4 Select delete rules, and press Enter. Doing so displays a list of current rules.
If no rules exist, a message displays at the bottom of the screen indicating
such.
5 Use the arrow keys to position the cursor over the rule you want to delete, and
press Enter.
6 Press CTRL-X to save your changes and return to the previous screen.
▼ Viewing IP Allow rules
1 Select the config menu, and press Enter.
2 Select security, and press Enter.
3 Select server, and press Enter.
4 Select view rules, and press Enter. Doing so displays the file containing the
IP Allow rules.
Controlling access to the Manager UI
The appliance uses Manager Allow rules to specify ranges of IP addresses that
are allowed to access the Manager UI. If you want to deny Manager UI access to
specific IP addresses, do not include them in a Manager Allow rule. You can add,
delete, and view Manager Allow rules.
▼ Adding Manager Allow rules
1 Select the config menu, and press Enter.
2 Select security, and press Enter.
3 Select mgmt, and press Enter.
4 Select add rules, and press Enter.
5 Enter a rule, and press Enter.
6 Press CTRL-X to save your rule and return to the previous screen.
Each rule must have the following format:
The IP address or range of IP addresses specified in the src_ip field are
allowed to access the Manager UI.
Examples
The following rule allows one user to access the Manager UI:
The following rule allows a range of IP addresses to access the Manager
UI:
src_ip=IPaddress or IPaddress_range action=ip_allow
src_ip=123.12.3.123 action=ip_allow
src_ip=123.12.3.000-123.12.3.123 action=ip_allow