Intel EK-KZPCM-UG Network Card User Manual


 
KZPCM PCI–to–Dual Channel Ultra SCSI and 10/100MB Ethernet Host Adapter
2–2 EK–KZPCM–UG. B01
2.2.2 KZPCM Host Adapter Kit Contents
The KZPCM Host Adapter kit contains the following:
KZPCM PCI-to-Ultra SCSI Host Adapter module
License Agreement
This guide
Release Notes
DIGITAL UNIX 4.0d KZPCM driver floppy disk
DIGITAL OpenVMS 7.1-1H1 and 7.1-1H2 KZPCM driver floppy disk
Windows NT 4.0 KZPCM driver floppy disk
Contact your Service Representative if any items are missing.
2.2.3 Back up Your System
Follow your normal procedures to back up your system before installing the
KZPCM Host Adapter.
2.3 Terminating the SCSI Buses
The KZPCM Host Adapter has dual-SCSI channel capability, and each bus must
be terminated at both ends of the bus. The Host Adapter can be located at the
beginning of the bus or in the middle of the bus; consequently, termination on
the Host Adapter itself can be enabled or disabled. Furthermore, if both the
wide- and narrow-SCSI connectors on the A-channel are used, the narrow-SCSI
termination on the Host Adapter must be disabled.
Use the termination switchpack, SW1, on the Host Adapter PCB (Figure 2-1) to
enable or disable terminations on the PCB. Tables 2-1 and 2-2 show how the
switchpack switches should be set according to how devices are connected to
Channel A and Channel B connectors, respectively, of the Host Adapter.