Filter
Top Products
KZPCM PCI–to–Dual Channel Ultra SCSI and 10/100MB Host Adapter
vi EK–KZPCM–UG. B01
4 Windows NT Installation
4.1 SYMC8XX.SYS Miniport Driver Description.......................................................... 4–1
4.2 Installing the SYMC8XX.SYS Miniport Driver....................................................... 4–2
4.3 Troubleshooting....................................................................................................... 4–3
4.3.1 No SCSI Devices Are Found During Installation.............................................. 4–3
4.3.2 A Disk Drive is Recognized as Seven Different Devices When Only One is
Physically Connected to the SCSI Bus.............................................................. 4–4
4.3.3 Problems with Ultra Devices Using Ultra Protocol........................................... 4–4
5 DIGITAL OpenVMS Installation
5.1 DIGITAL OpenVMS Driver Description ................................................................. 5–1
5.2 Installing the DIGITAL OpenVMS Driver............................................................... 5–2
5.2.1 DIGITAL OpenVMS, Version 7.1–1H1 Only................................................... 5–2
5.2.2 DIGITAL OpenVMS, Version 7.1–1H2 or Higher............................................ 5–6
5.3 Changing the SCSI ID of the Host Adapter (VMS) .................................................. 5–8
6 DIGITAL UNIX Installation
6.1 DIGITAL UNIX Driver Description ........................................................................ 6–1
6.2 Installing the DIGITAL UNIX Driver...................................................................... 6–1
6.2.1 Driver Installation............................................................................................6–2
6.2.2 Additon of New Hardware after KZPCM Installation....................................... 6–2
6.2.3 Bus Re-numbering............................................................................................6–3
6.3 Setting the Host Adapter SCSI ID (UNIX)............................................................... 6–5
6.3.1 Setting the Host Adapter ID at the System Console.......................................... 6–5
6.3.2 Setting the Adapter ID Under the UNIX Operating System .............................. 6–6
5 Ethernet Description and Configuration
7.1 KZPCM Host Adapter Ethernet Option Features...................................................... 7–1
7.2 Displaying and Setting Ethernet Port Characteristics................................................ 7–1
7.3 System Installation for Windows NT on Ethernet Option......................................... 7–2
7.3.1 Initial System Installation................................................................................. 7–2
7.3.2 Existing system Installation.............................................................................. 7–2
6 KZPCM Host Adapter Diagnostics
8.1 Locating the KZPCM Host Adapter in the System ................................................... 8–1
8.2 Determining the KZPCM Host SCSI ID................................................................... 8–3
8.3 Determining Which Drives are Connected to the KZPCM Host Adapter.................. 8–3
8.4 Locating SCSI Device ID Conflicts.......................................................................... 8–4
8.4.1 Two Disk Drives with the Same ID.................................................................. 8–4
8.4.2 Disk Drives with the Same ID as the Host........................................................ 8–4