Filter
Top Products
KZPCM PCI–to–Dual Channel Ultra SCSI and 10/100MB Ethernet Host Adapter
2–6 EK–KZPCM–UG. B01
Figure 2–2 Inserting the Host Adapter in a Slot
2.5.2 Connecting Internal SCSI Devices
Refer to your SCSI device documentation if you want to install one or more
SCSI device inside the host computer. The internal device(s) must be single-
ended.
To connect an internal SCSI device to the KZPCM Host Adapter, you will need
one, or both, of the following cables depending on the requirements of your
internal drive.
•
A 50-pin connector SCSI ribbon cable with a 50-pin header internal connector
to mate with the Host Adapter 50-pin connector
•
A 68-pin connector SCSI cable with a 68-pin header internal connector to
mate with the Host Adapter 68-pin connector