Filter
Top Products
Chapter 5. DIGITAL OpenVMS Installation
EK–KZPCM–UG. B01 5–5
NOTE
You will see the following error; simply ignore the
message at this time.
%PCSI-E-OPENIN, error opening _DVA0:[VMS$COMMON]*-*-*-%%%%%-*-
*.PCSI*; as input-RMS-E-FNF, file not found
%PCSIUI-I-NOMATCH, no products were found matching: *
%PCSIUI-E-NOPROD, no products were found on which to perform this
operation
%PCSIUI-E-ABORT, fatal error encountered - operation terminated
AUTOGEN will now be run to compute the new System Parameters.
The system will then shut down and reboot.
On which device will the secondary media be mounted [default 2
(DVA0)]: (
<CR>
accept the default)
Is the secondary boot media ready in drive DVA0 (Y/N) [Y]:
(
<CR>
accept the default)
OpenVMS (TM) Alpha Operating System, Version V7.1-1H1
%INITIODB-I-CHECKING_FORDEV, Checking for foreign device defini-
tions.
Is the secondary boot media ready in drive DVA0 (Y/N) [Y]:
(
<CR>
accept the default)
Loading SYS$PKWDRIVER.EXE from the Secondary Boot Media.
Loading SYS$DVDRIVER.EXE from the Secondary Boot Media.
$! Copyright (c) 1996 Digital Equipment Corporation. All rights
reserved.
Welcome to OpenVMS (TM) Alpha Operating System, Version V7.1-1H1
Username: system
Password: ********
Welcome to OpenVMS (TM) Alpha Operating System, Version V7.1-1H1
$ mount dva0 3pbkit
%MOUNT-I-MOUNTED, 3PBKIT mounted on _LAB10$DVA0:
$ set def dva0:[000000]
$ product install ITI3140
4. After the installation completes, reboot the system as follows:
$
shutdown
>>>
set bootdef_dev dkb0
>>>
set boot_osflags 0,0
>>>
boot