Filter
Top Products
Chapter 3. Installing the KZPCM Host Adapter
EK–KZPCM–UG. B01 3–3
3.3 Selected Adapter Utilities Menu
After you select one of the available adapters from the
Main Menu
, the selected
SCSI adapter scans for connected devices and the
Utilities
menu appears (Figure
3-2).
Figure 3–2.
Utilities
Menu
UTILITIES
A…………Adapter Setup
B…………Device Selections
F1………Help
ESC……Exit this menu
Choose
Adapter Setup
to change or view the selected adapter settings; choose
Device Selections
to gain access to the devices of the selected adapter.
3.4 Adapter Setup Menu
If you select
Adapter Setup
from the
Utilities
menu, the
Adapter Setup
menu
appears (Figure 3-3). Use the descriptions that follow to set up an adapter.
Figure 3–3
Adapter Setup
Menu
ADAPTER SETUP
S………SCAM Support ON
P………Parity Enabled
I………Host SCSI ID 7
O………Scan Order Low to High (0…MAX)
F1……Help
F2……Restore Default Setup
ESC…Exit this menu
•
SCAM Support
[S]
– S
CSI Configured AutoMatically, a protocol to set
SCSI IDs automatically is enabled by default and can be disabled here. Note
that even though many external devices do not support SCAM, it should not
be necessary to disable SCAM.