Filter
Top Products
KZPCM PCI–to–Dual Channel Ultra SCSI and 10/100MB Ethernet Host Adapter
3–4 EK–KZPCM–UG. B01
• Parity [P]
– Parity checking on the SCSI bus is enabled by default. Parity
checking should not be disabled, due to the increased probability of
undetected errors on the SCSI bus. If you are experiencing parity errors,
check the termination of the bus, the total length of the SCSI bus, and the
quality and condition of the SCSI cables.
• Host SCSI ID [I]
– SCSI ID for the selected channel or host adapter.
Default is 7. The utility will not allow selection of an ID that is seen to
conflict with another SCSI ID.
• Scan Order [O]
– Determines whether the SCSI bus is scanned from ID 0, in
ascending order to ID 15, or from ID 15 in descending order to ID 0.
Default is Low to High.
• Help [F1]
– On screen help utility. Provides help on current menu screen.
• Restore Default Setup [F2]
– Restores all settings on the current page to
Factory Default Settings.
• Exit this menu [ESC] –
Returns to the Main Menu.
3.5
Device Selections
Menu
If you select
Device Selections
from the
Utilities
menu, the
Device Selections
menu appears (Figure 3-4).
Figure 3–4.
Device Selections
Menu
DEVICE SELECTIONS
Sync Data Time Scan Scan Queue
Rate Width Disc Out Bus LUNs Tags
0.RZ1DB-VW 40 16 On 10 Yes Yes Enabled
1.Dev1 N/A 40 16 On 10 Yes Yes Enabled
2.Dev1 N/A 40 16 On 10 Yes Yes Enabled
3.Dev1 N/A 40 16 On 10 Yes Yes Enabled
4.Dev1 N/A 40 16 On 10 Yes Yes Enabled
5.Dev1 N/A 40 16 On 10 Yes Yes Enabled
6.Dev1 N/A 40 16 On 10 Yes Yes Enabled
7.SYM53C875 40 16 On 10 Yes Yes Enabled
D……………………………………Device Selections 8 – 15
F1…………………………………Help
ESC………………………………Exit this menu
Use arrow keys to select from menu. Then press ENTER.