Chapter 5. DIGITAL OpenVMS Installation
EK–KZPCM–UG. B01 5–7
3. From the system SRM console boot the CD-ROM drive as follows:
>>>boot –flag 0,80000 dka400,dkb0,dva0
(Where dka0 is the DIGITAL OpenVMS installation 7.1-1H2 CD-ROM,
dkb0 is the target device for the installation, and dva0 is the KZPCM Host
Adapter driver distribution floppy).
The KZPCM drivers will be installed as part of the installation process and disks
on the adapter will be made available as targets for the installation process.
Follow instructions on the screen and in the DIGITAL OpenVMS documentation
to complete the DIGITAL OpenVMS installation.
NOTE
The following erroneous error message is ex-
pected, and install will continue properly:
Is the secondary boot media ready in
driver DVA0 (Y/N) [Y]:
Loading SYS$CPU_ROUTINES_1605.EXE from
the Secondary Boot Media.
%SYSBOOT-I-FILENOTLOC,Unable to locate
SYS$CPU_ROUTINES_1605.EXE
NOTE
You might also encounter the following benign er-
ror message:
IDE command not successfully
terminated
ST0 = 40
Missing address mark
5.2.2.2 Installing the Driver in an Existing System
Do the following steps to install the driver in an existing system.
1. Mount the installation floppy disk:
$
mount dva0: 3PBKIT
2. Set your default directory to be the installation root:
$
set def dva0: [000000]
3. Examine the
README.TXT
file:
$
type readme.txt