KZPCM PCI–to–Dual Channel Ultra SCSI 10/100MB Ethernet Host Adapter
7–2 EK–KZPCM–UG. B01
FULL DUPLEX TWISTED PAIR
AUI
BNC
FAST FD
[Note that AUI and BNC are not supported]
•
Use
SHOW
to display characteristics of the Ethernet port:
>>>
Show Ewn0_mode
You can select two different Ewn0_PROTOCOLS:
MOP for VMS DECNET or BOOTP for UNIX TCP/IP
7.3 System Installation for Windows NT on Ethernet Option
You can do an initial system installation or an existing system installation; either
installation presumes that you have installed the module in an appropriate PCI
slot and have made external and internal connections to the Host Adapter. Do
the applicable section following.
7.3.1 Initial System Installation
Do these steps for an initial system installation.
1. Turn on the host computer and begin the NT installation procedure.
2. Windows NT detects the DEC PCI Fast Ethernet DECchip 21140A during
installation of networking components.
3. A dialog box appears with
DEC DECchip 21140A Based Adapter Setup
.
4. You are asked to select a
Connection Type
. It is recommended that you
select the connection type that matches your network configuration. If you
are unsure of your network connection type, select
AutoSense
.
5. When prompted select
Finish
if everything is satisfactory.
7.3.2 Existing System Installation
Do these steps for an existing system installation.
1. From the Control Panel double click the
Network
icon.
2. Select
Add Adapter
and choose
DEC PCI Fast Ethernet
DECchip 21140A
from the list provided.
3. A dialog box appears with
DEC DECchip 21140A Based Adapter Setup