Filter
Top Products
EK–KZPCM–UG. B01 3–1
3
BIOS Configuration Utility
This chapter describes the BIOS Configuration Utility and tells you how to use it to
change Host Adapter characteristics.
All adapters located by the Alpha BIOS will be displayed on the screen. Use the
arrow keys to select the KZPCM adapter, and press the
Enter
key to begin
configuring the adapter. By default all adapters are enabled, and the highest
performance settings have been selected.
3.1 Starting the On-board Configuration Utility
When you have connected the internal and external devices, and have configured
the termination of the SCSI bus correctly, you are ready to re-assemble the
computer enclosure. After assembly reconnect all peripherals that you
disconnected, and turn on the power to all external enclosures and peripherals.
Turn on the computer. After the computer completes the Power On Self Tests
(POST), the BIOS on the adapter displays the message (Alpha BIOS only):
Press Ctrl-C to Start Configuration Utility…
Hold the
Ctrl
key and press the letter
C
key to activate the built-in
configuration utility; the following message is displayed:
Please wait, invoking Configuration Utility
Starting SCAM protocol
The
Configuration Utility
Main Menu
appears (Figure 3-1). Follow the on-
screen instructions and the descriptions in Section 3.2 to configure host adapters
and connected devices.