Juniper Networks M10i Network Router User Manual


 
Channelized OC12 IQ PIC
JUNOS 6.1 and laterSoftware release
One OC12 port
Power requirement: 0.23 A @ 48 V (10.8 W)
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
Channelization: OC3, DS3, DS1, DS0
Description
Subrate and scrambling:
Digital Link/Quick Eagle
Kentrox
Larscom
ADTRAN
Verilink
Packet buffering, Layer 2 parsing
M13/C-bit parity encoding
DS3 far-end alarm and control (FEAC) channel support
Local and remote loopback testing
Hardware features
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
Dynamic, arbitrary channel configuration
Full bit error rate test (BERT)
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
Software features
Duplex SC/PC connector (Rx and Tx); single-mode fiber
Optical interface supportSee Table 6 on page 25
Cables and connectors
24 Channelized OC12 IQ PIC
M10i Internet Router PIC Guide