Juniper Networks M10i Network Router User Manual


 
E3 IQ PIC
JUNOS 6.1 and laterSoftware release
Four E3 ports
Power requirement: 0.38 A @ 48 V (18 W)
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
Description
Clear-channel (34.368-Mbps) and subrate E3
Unframed or ITU G.751 framing
Data service unit (DSU) functionality
Subrate and scrambling:
Digital Link/Quick Eagle
Kentrox
HDB3 line encoding
Full bit error rate test (BERT)
Local and remote loopback testing
Hardware features
Quality of service (QoS) per port: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
Simple Network Management Protocol (SNMP): E3 MIB, QoS MIB
Input policing and output shaping
Provider-side rate limiting
Full data link connection identifier (DLCI) range with sparse channel numbering
Per-DLCI queues with weighted deficit round-robin and strict priority
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
JUNOS Release 7.0 or later is required to configure graceful Routing Engine switchover
(GRES).
Software features
Standard E3 BNC coaxial cable interfacesCables and connectors
38 E3 IQ PIC
M10i Internet Router PIC Guide