Table 12: MultiServices PICs Software Features Supported by the M10i Router (continued)
8.1Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and
ping of death attacks
8.1Network Address Translation (NAT) for IP addresses
8.1Port Address Translation (PAT) for port numbers
8.1IP Security (IPSec) encryption
8.1Active flow monitoring exports cflowd version 5 and version 8 records
8.3Active flow monitoring exports flow monitoring version 9 records, based on RFC 3954
–Passive flow monitoring
–Passive flow collection
8.2Flow-tap
–Dynamic flow capture
8.2Real-time performance monitoring
8.1Link services
8.1Tunnel services:
■
IP-IP unicast tunneling
■
GRE unicast tunneling—Supports GRE fragmentation
■
Protocol Independent Multicast (PIM) sparse mode unicast tunneling
8.1Virtual tunnel interface for Layer 3 VPNs
8.1Layer 2 Tunneling Protocol (L2TP)
8.1Voice services:
■
Compressed Real-Time Transport Protocol (CRTP)
8.1Encapsulations:
■
Multilink Frame Relay (MLFR)
■
Multilink Point-to-Point Protocol (MLPP)
56 ■ MultiServices 100 PIC
M10i Internet Router PIC Guide